The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

Analysis of Cerebrospinal Fluid Extracellular Vesicles by Proximity Extension Assay: A Comparative Study of Four Isolation Kits

There is a lack of reliable biomarkers for disorders of the central nervous system (CNS), and diagnostics still heavily rely on symptoms that are both subjective and difficult to quantify. The cerebrospinal fluid (CSF) is a promising source of biomarkers due to its close connection to the CNS. Extracellular vesicles are actively secreted by cells, and proteomic analysis of CSF extracellular vesicles (EVs) and their molecular composition likely reflects changes in the CNS to a higher extent compared with total CSF, especially in the case of neuroinflammation, which could increase blood–brain barrier permeability and cause an influx of plasma proteins into the CSF. We used proximity extension assay for proteomic analysis due to its high sensitivity. We believe that this methodology could be useful for de novo biomarker discovery for several CNS diseases. We compared four commercially available kits for EV isolation: MagCapture and ExoIntact (based on magnetic beads), EVSecond L70 (size-exclusion chromatography), and exoEasy (membrane affinity). The isolated EVs were characterized by nanoparticle tracking analysis, ELISA (CD63, CD81 and albumin), and proximity extension assay (PEA) using two different panels, each consisting of 92 markers. The exoEasy samples did not pass the built-in quality controls and were excluded from downstream analysis. The number of detectable proteins in the ExoIntact samples was considerably higher (~150% for the cardiovascular III panel and ~320% for the cell regulation panel) compared with other groups. ExoIntact also showed the highest intersample correlation with an average Pearson’s correlation coefficient of 0.991 compared with 0.985 and 0.927 for MagCapture and EVSecond, respectively. The median coefficient of variation was 5%, 8%, and 22% for ExoIntact, MagCapture, and EVSecond, respectively. Comparing total CSF and ExoIntact samples revealed 70 differentially expressed proteins in the cardiovascular III panel and 17 in the cell regulation panel. To our knowledge, this is the first time that CSF EVs were analyzed by PEA. In conclusion, analysis of CSF EVs by PEA is feasible, and different isolation kits give distinct results, with ExoIntact showing the highest number of identified proteins with the lowest variability.     

Carbon radicals generated by solid polymers: Electron spin resonance spectroscopy for detection of species in water

Radicals generated in plastic medical devices (solid phase) by γ-rays or electron-beam irradiation during sterilization are known to cause oxidation of protein drugs, resulting in a loss or reduction in drug efficacy. The generation of radical species in water by the radical species in solid polymers has not been proved. Using electron spin resonance (ESR) spectroscopy, we confirm the generation of new radicals in water by γ-ray irradiated cyclic olefin polymers (COP). ESR measurements are obtained using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) as a spin probe and 5-(2,2-dimethyl-1,3-propoxycyclophosphoryl)-5-methyl-1-pyrroline N-oxide (CYPMPO) as a spin trap, in which the irradiated COP was immersed. The ESR signals indicate the TEMPOL radicals decline over time, suggesting the generation of new radicals. Conversely, the characteristic ESR signals of the adduct formed by the reaction between CYPMPO and the hydroxyl radical are observed. Thus, hydroxyl radicals are generated because of the migration of the radicals from COP to water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48604.     

Frequency of Upward Lightning Hits to Wind Turbines in Winter

In recent years, frequent damage to wind turbines by winter lightning has been reported in the region along the Sea of Japan. It is a serious finding that lightning hits concentrate on wind turbines in this region. The authors investigated the increase rate of the frequency of lightning hits on wind turbines due to wind turbine construction by using LLS (lightning location system) data. As a result, an experimental formula to estimate the increase rate of the frequency of lightning hits on wind turbines as a function of parameters related to the construction conditions, namely the height of wind turbines, the height above sea level, and the latitude, is proposed.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Synthesis of 4‐Aryl‐2‐Quinolones via Copper‐Catalyzed Hydroarylation of (o‐Aminophenyl)propiolates with Arylboronates

4‐Aryl‐2(1H)‐quinolones were efficiently synthesized via copper‐catalyzed hydroarylation of (o‐aminophenyl)propiolates with arylboronic acid neopentyl glycol esters. The substrate propiolates were prepared from the corresponding silylalkynes with carbon dioxide by Kondo’s carboxylation method using N,N‐dimethylformamide as a solvent. Hydroarylation was performed in the presence of 3 mol% copper(II) acetate in methanol at 28 °C for 12 h and subsequent deprotection using trifluoromethanesulfonic acid (3.0 equiv.) at 65 °C for 2 h in the same pot to afford the desired 4‐aryl‐2(1H)‐quinolones in 39–89% yields.

     

重庆水晶郦城

水晶郦城环境自然、外观简洁、户型独特,是一个高层低密度的经典实例,是对高层创新性的完美演绎,代表了健康住宅的一个新方向。